Sunsei SolarCharger SE-4000

/core/media/media.nl?id=18732&c=311902&h=45e7793e875826ecbf93

Rollover to zoom image

Sometimes you just need serious energy to keep your RV or boat going and going. Maybe you don’t want an uppity, high-maintenance mechanical generator spewing out diesel or propane fumes. (Cough, cough). Fresh air, man. That’s why you’re out here doing yoga in the middle of who-knows-where, getting off on that that heavenly air. So mount your weatherproof, aerodynamically designed Sunsei® SE-4000 Solar Charger to the roof of your RV or boat deck.

Perfect match for back-up power in RVs and boats. This powerful solar panel provides reliable, renewable energy as an alternative to noisy and expensive diesel, propane and gas generators. Gives power all year round when exposed to daylight

Charges multiple batteries at once, works with your vehicle’s / cabin’s electrical system

Just expose it to daylight and you have peace of mind. Yeah, that easy.

Like all of our most excellent Sunsei® products, the SE 4000 comes with a 20 year power warranty (guaranteeing 80% of the output power). Count on Sunsei® and the power of the sun.

All connector wires and mounting hardware are included. We also highly recommend that you pick up one of our charge controllers from our accessories section to operate this powerful and almighty Solar Charger.

Click in the image to see alternative views

$699.95

Qty:

$39.95

Sunsei Charge Controller CC-10000

$59.95

Sunsei Pole Mounting Kit:

Model SE-4000
Power: 4A, 16.5V (65W)
Integrated blinking indicator lets you know your panel is charging
Plug’n’Play® for quick connections, connector wires and mounting hardware included
Aerodynamic design specially engineered to reduce drag and withstand high-vibration on mobile applications
The box includes
1 panel SE-4000
+ Connector wires
+ 4 mounting brackets
Important: for this powerful solar panel you’ll need a charge controller, please consult the accessories section
Dimensions: 32.0” x 28.3” x 1.4” / 81.2 cm x 72.0 cm x 3.6 cm
Weight: 15 lbs / 6.8 kg
Weatherproof
20 year power warranty (80% of the output power)

INSTALLATION PROCEDURE

Step 1: Positioning
Select a location where your solar panels will get maximum daily sunshine exposure avoiding any shade. This may be on the roof or exterior walls of homes, cabins, RVs, etc. Ideally, try to have your panel facing perpendicular to the strong midday sun, between 10AM and 2PM.

Step 2: Mounting
Choose a solid and supportive mounting surface, capable of withstanding all expected loads, including the weight of the solar panel as well as those imposed by wind and snow. Attach “S” mount brackets to solar panel frame using screws and bolts provided. Use at least one bracket on every side of the panel. Position brackets on frame by sliding along track. Tighten screws to secure brackets to frame. Connect power cable to solar panel connector Using screws provided, secure solar panel to surface selected in step 1.

Step 3: Multi-Panel Connection
If you have more than one SolarCharger 4000/6000/8000 panel, simply connect the Plug’n’Play® corner of one panel to the next using the quick-connect cable (SKU#10222, available for purchase separately). Observe steps 1 and 2 when mounting additional panels.

Step 4: Charge Controller to Battery Connection
Place the charge controller in a cool, dry and well ventilated area that can be easily accessible, usually around the battery compartment or in the cabin area. Connect the charge controller’s output or BATTERY+ Negative (black or -) connection to the Negative (-) terminal of the battery. Next, connect the controller ’s output or BATTERY Positive connection (red or +) to the Positive (+) terminal of the battery.

Step 5: Charge Controller to Panel Connection
First, connect the power cable to the charge controller’s input or “Solar Panel / Array” connection. Start by connecting the black negative (-) wire of the power cable to the charge controller’s Negative (-) connection. Then, connect the red positive (+) wire of the power cable to the positive (+) connection of the controller. Second, plug in the quick-connect side of the cable to your solar panel’s quick connect port.

NOTE: For more details on the charge controller operation, consult the controller instructions included with your Sunsei™ charge controller (available separately).

NOTE: Remove yellow wire protector caps prior to connecting to a Sunsei™ charge controller
NOTE: The installation procedure above is an abstract from the complete manual (included in the box). Before installing your solar charger please consult this full paper version.

$39.95

Sunsei Charge Controller CC-10000

$99.95

Sunsei Charge Controller CC-25000