Model Solar Power Kit CL-3600
Engineered to charge 12V batteries for remote systems
Total power: 3.6A, 15V (54W)
LED indicator lets you know the panel is charging
Mounting screws included
Plug’n’Play® for quick connections, 10’ power cable, cigarette lighter adapter and battery clamps included
The box includes
(3) solar panels CL-1200
+ (1) charge controller, 4A
+ (3) 10’ Power extension cables
+ (1) three into one wire junction harness
+ (1) cigarette lighter adapter
+ (1) battery clamp connector
+ (3) mounting screw sets (containing 4 screws each)
+ (1) instruction manual
Dimensions each panel: 38.9” x 14.1” x 0.91” / 98.9 cm x 35.7 cm x 2.3 cm
Weight each panel: 10.6 lbs / 4.8 kg
Weather proof
2 year warranty
Mounting Your Solar Panels
Each panel must be securely mounted using either a stand or a permanent structure (not included). To mount your solar panels, place one of each of the four (4) screws provided in the mounting holes of the plastic housing. Please be sure to mount the panels in an upright position (blue LED at the top) and to allow room for the J-plug output cables to be connected to the three-into-one wire junction harness.
Connecting Solar Panels to charge controller
1. Connect the 10-ft (305 cm) J-plug output cables from the three (3) respective panels into the three-into-one wire junction harness.Simply snap the J-plug connectors together.
2. Connect the three-into-one wire junction harness directly into the J-plug to splice wire assembly that is connected to the charge controller input solar panel port by snapping both J-plugs together.
NOTE: The installation procedure above is an abstract from the complete manual (included in the box). Before installing your solar charger please consult this full paper version.
